( 9.30am -5.30 pm )
Promises that " is you can find the same cheaper at any internet - based shop that they will either match the price or beat it by ££5,and
YES IT WINS THE PRICE WAR "
The Independent on Sunday, 23th September 2001
Why Car Stereo Deals ?
- Established in 1974
- Wide Selection of Products
- 24 hr UK Nationwide delivery
- 12 months warranty
- Lowest Prices Guaranteed
 |
Kenwood KFC-W112S + LS500.2 + BOX + AMP KIT 12" 800 Watt Kenwood Subwoofer, teamed-up a T1 Audio 600W 2 Channel amp (amp kit & box included)
Kenwood KFC-W112s Subwoofer Specifications :
- 300mm (12") subwoofer
- Injection P.P.Cone Woofer
- 800W Maximum Input Power
- Silver Plated Terminals
- High-roll Urethane Surround
- Speaker Type Subwoofer
- Peak Input Power 800W
- Rated Input Power 200W
- Speaker Size: 300mm
- Magnet Type: Ferrit
- Terminals: Silver PLated Screw / slide type
- Gasket Installation one-way (Fixed)
- Installation Capabillity: Sealed/ Ported
- Peak Input Power 800W
- Maximum Input Power 400W
- Rated Input Power 200W
- Woofer Cone material: Injection P.P. Cone
- Speaker Basket: Steel
- Speaker Surround: Urethane
- Sensitivity 90dB/W/m
- Frequency Response 28Hz ~ 800Hz
- Subwoofer Impedance 4õÇ? x 1
- Dimensions (W x H x D) 328 x 328 x 159,8mm
- Mounting Depth 138,6mm
- Mouting Hole Diameter 274mm
- Speaker Weight 3270gr
- Gross Weight 4400gr
- Weight of Magnet 748gr
T1 Audio LS500.2 Amplifier Specifications :
T1 Audio amplifiers have been engineered to deliver big power but while retaining quality. Many budget amplifiers are produced to deliver power, but do so in a raw and often unregulated way.
T1 Audio amplifiers are specifically designed to maintain a level of quality at all volumes by delivering consistent power progressively through the range of the amplifiers capacity. This smoother power delivery will significantly increase the life of your speakers.
- Maximum Output 600W
- 4 Ohm Max Power Output @ 0.07% T.H.D. 300W x 2 ch
- 4 Ohm Bridged Power Output @ 0.07% T.H.D. 600W x 1 ch
- 2 Ohm RMS Output @ 0.07% T.H.D. 100W x 2ch
- 4 Ohm RMs Output @ 0.035% T.H.D. 50W x 2ch
- Frequency Response 15Hz - 40KHz
- Signal to Noise Ratio >95dB
- Stable into 2Ohms operation
- Bass Boost (Variable) 0dB to + 18dB
- Input Sensitivity 200mV - 6V
- Input Impedance 47K Ohms
- Operation Voltage (Negative Ground) DC 12V
- Speaker Impedance @ Stereo Driven 4 Ohms
- Fuse Rating 25A x 2
- Dimensions ( W x H x D ) mm 242 x 54 x 288 mm
Carpeted MDF Box & suitable wiring Kit included
